1. Carrousel Pump: all carrousel pumps are available in 110vac, 220vac, Pneumatic, and Hydraulic.
- 1" Mini Pump
- Available in hand cranked or electric power mounted on a two-wheel dolly with air compressor 110vac.
- Only available in 110vac.
- 1" Carrousel Pump
- Excellent Choice for Epoxies
- 1.25" Carrousel Pump
- Recommended for 110vac use.
- 1.50" Carrousel Pump
- Excellent for pneumatic or hydraulic power.
- 2" Carrousel Pump
- For jobs using heavier body mixes and larger production demand.
- Not available in 110vac.
- Heavy-Duty Grout Carrousel Pump
- Sprays grout applications such as epoxy, cement, and plaster.
- Underlayment Carrousel Pump
- Two 3.2 cu.ft. parabaloic shaped hopper.
- Two speed high torque mixing motors.
- Water tank
- Fireproofing Carrousel Pump
- Uses a high capacity Quikspray industrial compressor generating 10-13 CFM with 1.5-3 HP at 110/220vac
- Quikpump (Marine) Carrousel Pump
- Pumps out unwanted objects that may have gotten stuck in a boat’s holding tank.
- This pump could also be used as a fluid transfer pump.
2. Mixers
- U-Blend Mixer
- Designed to allow lower dumping heights for a variety of containers that eases operator fatigue.
- Cage Mixer
- Available in 5" and 7.5"
- Draws the material into and through the blades, which by shear action, evenly disperses and blends the ingredients.
- Post Mixer
- For uses requiring explosion-proof performance.
- Used to mix lime-putty, acoustics textures, epoxies, deck coatings, waterproofers, texture paints, cement coatings, fast set plaster, glass fiber SBC, and drywall textures.
- QuikBatch Mixer
- Easily changed between different size batch requirements.
- Quikstir Mixer
- Designed for quick thorough mixing of aggregated epoxy coatings and a multitude of other applications.
- Batch Mixer
- Used for research and development projects, laboratories, schools, production work.
- Mixes epoxies, paints, chemicals, cements, adhesives, plaster, ceramics, inks, and petroleum.
3. Sprayers
- Commercial Chip Sprayer
- Features a 2-speed 2-3 HP blower with 150/196 cfm of air.
- Increases production by 10x.
- Chip Sprayer
- Hand held chip sprayer
- Industrial AG-Blower
- Place quartz aggregate, sand, fillers, or non-skid granules at a rate of 30-40 lbs/min into unset epoxy, cement, or polyester base coats.
- Stone Blower
- Handles fine sand up to No. 4 stone and has controllable air volume for even distribution.
No comments:
Post a Comment